65 mm PAIR of Paddle Wheel Kit for model steam ship A136m
This is a c.n.c. Cut kit to make a Pair Paddle wheel for a model boat.
It builds into a 65 mm Diameter unit that is 25mm wide.
Construction is from 2mm thick acrylic and required adhesive (solvent weld, Epoxy or Cyano.)
Kit consists of 4 x Wheel frames.
4x hub doublers.
16 x paddle blades
2 x centre alignment tube.
Suitable for static or R/C
They will require a little sanding and cleaning up before assembly and can be painted to whatever colour you desire.
Centres are drilled at 2 mm but could be opened up as required.
Please Note these items are not mass produced and therefore can take 1-2 days to despatch.
Cayton Vintage Models
We are a very small business and would say that we are enthusiasts first. We try to give the best possible value and service so if you have any issues or questions, please contact us.