Baytone Jazz Guitar Pickup Tab Mounted Slimline CC Style J007
Charlie Christian Tab Mounted Jazz Pickup Slimline
These have now been upgraded to Alnico2 Magnets
- .42 gauge Scatter wound enameled copper wire
- 6.5 to 7K resistance but can be underwound to 5k on request for a more delicate sound.
- 12mm total thickness (1/2in)
- Floating Scratchplate Mounted
- No Disfigurement of instrument required
- Velvet covered rear plate to avoid scratches
- High Gloss polished Finish
These are designed to be fitted to a floating scratch plate assembly. The controls can also be mounted on the scratch plate meaning minimal disturbance to your guitar, other than the scratch plate mount holes. See Installation Notes wiring-our-pickups.html
They are usually attached to a mini jack socket.
Use nuts and bolts or glue to mount.
Epoxy resin or Cyano are both suitable and the tab can be easily sut to length, it is usually oversized, with a small hacksaw.
See Demo Nos 8 &12 for a sound sample.
Postage UK £4.90
A signature will be required
Please note there is a 3 to 5 day processing time from order to dispatch.
Graham Crampin wrote of this Pickup "The handmade quality is very apparent and rare to find that in this mass produced day and age - I would honestly have to say superb value in fact.
Just to add, I've done a few gigs with the guitar now - the new pickup has transformed it. The sound is wonderfully warm and smooth, with that 'vintage' quality and yet beautifully detailed, articulate and responsive. Note separation and clarity is fantastic. Fitting this pickup was the best decision I've made in a long while, cheers!"
Transducers, made in our workshop at Cayton Village, near
Scarborough by the beautiful North Yorkshire coast in England.
The bobbins or armatures are cut, milled, drilled and filed from raw sheet materials including Brass, Perspex, Bright Steel and Plastic, with details such as contrasting binding being hand applied.
They are copper foil shielded before being assembled and lacquered.
We have our own designed and built winding machine with electronic counter and speed control for precise calibration.
This is used to apply the vintage enamel coated wire, slowly and with maximum diversity-in other words they are scatter wound as randomly as possible at only medium tension.
This process endows our pickups with both unique character and rich harmonic complexity as well as a very open sound quality.
The Alnico magnets and lead out wires are applied before wrapping with a very open weave cloth tape. They are wax potted with this first layer of wrap applied. This, along with our unique lead out routing, makes a virtually indestructible coil under normal handling.
Depending upon the model, extra shielding is applied and a final tape wrap.
I test EVERY pickup before despatch to ensure every one works and you do not receive a dead pickup.
They are issued with a 1 year limited warranty as outlined below.
I can make pickups to spec/colour, please contact me.
The transducer is guaranteed for one year against manufacturing
However, we do not cover the device against misuse or rough handling
Reverse EMF, caused by connecting to a speaker or headphone output on your amplifier, Incorrect installation, Damage caused by faulty
amplification, Damage to or cutting short of the flying lead, cosmetic damage caused by guitar picks etc, water ingress or being left in a damp environment.
So far, we have had some really nice reviews of our products, pickups and builders plans.
Greg Erba said, Absolutely fantastic pickups, incredible harmonic complexity
"Excellent seller, quality item great communication recommended seller"
Am very happy with the full, fat, creamy, overdriven, jazzy sound!
And for a amount that won’t break the bank.
Greets Fred Dingemans, the Netherlands (BaytoneCR1)
I ordered a 8.0 K CC pickup in ivory from you last week.
Safely arrived and now installed.
It's a beauty! I am one very happy man!
The tone is everything I hoped for and more
Best wishes for the future - long may you remain in business.
Just to let you know the Ricky bass had it's first serious outing last night at a gig the lads did....the pickups sounded bloody awesome .......Joe was delighted with it.....all very impressed"
Jim Bishop Guitars
Kevin Brown Said about the CR2 Christian style pickup
"That pickup truly is remarkable and actually very similar to the ricky fry pans, bigsby and clinesminth in sound, very steely.
Thats a marketable property to have in a 'sound'
They have steel/alloy components to magnify sustain, but yours does it at a fraction of the cost."
Great ebayer Thanks, pickup going in les paul junior build 5* on price.
Thank you, everything perfect and good manufacturing quality! (P51 pickup)
excellent quality, excellent service. superb value. well pleased. Thanks John
We offer a no quibble warranty with all of our products and take pride in our customer feedback.